Short answer: A good lighting plan layers ambient light (ceiling or wall), task light (worktops, desks, mirrors) and accent light (alcoves, art), puts them on separate circuits with dimmers, and is fixed before the electrician starts first fix. Moving a ceiling light after plastering costs far more than drawing it now.
The three layers
| Layer | Purpose | Examples |
|---|---|---|
| Ambient | General light | Recessed downlights, pendants, wall lights |
| Task | Specific activities | Under-cabinet lights, desk lamp, mirror lights |
| Accent | Mood and focus | Picture lights, shelf lights, uplighters |
Decide before first fix
- Position of every switch, dimmer and light.
- Whether fittings are fixed or portable.
- Separate circuits so lights can be dimmed or zoned.
- Bathroom IP ratings for fittings near water.
Common mistakes
- A grid of downlights that makes a flat, harsh room.
- No task light over worktops.
- Switches placed where doors swing against them.
See it in 3D
The 3D room helps you test positions of fittings relative to furniture, windows and the kitchen units. Then export your layout notes for the electrician.
Frequently asked questions
How many downlights do I need?
It depends on the room and fittings; avoid a rigid grid and layer with other light sources.
Do I need a certificate for lighting changes?
New circuits in England and Wales usually need Building Regulations compliance; use a registered electrician.
Related guides
This guide is general information for homes in the UK, not legal, structural or financial advice. Costs are indicative ranges and vary with your property, region, specification and builder; always obtain written quotes.