Short answer: A good utility room puts the washing machine, tumble dryer and sink on a shared wall of services, leaves about 1 m of standing space, adds a drying solution and plenty of tall storage. It can fit in a space as small as 1.5 m by 2 m if the door and the machines are planned together.

What to put in

  • Washing machine and dryer, stacked or side by side.
  • Utility sink with a drainer.
  • Drying: heated rack, ceiling airer or condenser dryer.
  • Broom, mop and coat storage, plus a boot space.

Services to check

  • Water supply and waste near the machine and sink.
  • Extraction or a window for ventilation.
  • Sockets above worktop height and a dedicated circuit for machines.
  • Floor that tolerates a leak.

Layouts compared

LayoutRoomNotes
Single wallCorridor or cupboardMachines and sink in a row; tight but efficient
L-shapeSmall roomWorktop over machines on one side, storage on the other
Boot room comboBack door entranceBench and hooks along with machines

Plan it as a small kitchen

Place the machines, a worktop and wall units in the 3D room and check door swings, then compare with the kitchen layout so the two rooms share services where possible.

Frequently asked questions

Do I need a separate utility room?

No, but moving machines out of the kitchen frees space and reduces noise.

Can I add one in a garage?

Often yes; see our guidance on garage conversion design.

Lay out a utility room in 3D

This guide is general information for homes in the UK, not legal, structural or financial advice. Costs are indicative ranges and vary with your property, region, specification and builder; always obtain written quotes.